Altana Spectro-Guide Sphere Gloss Manual Manual de usuario descargar pdf (Pagina 24)

Measuring procedure

7. Measuring procedure

7.1 Measuring

Switch the instrument on. The display shows the

difference measurement.

Set the instrument on the sample to be measured.

Now press the Operate button to start measuring.

The beep indicates that measurement has been

completed. The display will now show the measured

values for the new sample as well as the differences

to the last measured standard. As an alternative to

the Operate button, you can use the automatic

trigger to perform the measurement. To do this, hold

the instrument as shown in the accompanying

illustration.

Press on the instrument to start measuring. The

trigger is provided for measuring inaccessible areas.

The beep indicates that measurement is complete.

You can now decide whether to store your reading

as a standard or a sample. Use the

button in the difference mode to perform a quick

standard measurement. The following message

appears on the display:

Measuring Standard

std

File Display Option

L* 92.45 L* 0.04

a* 0.46 a* 0.01

b* - 1.55 b

0.03

E0.05

D65/10°

Sample

File Display Option

L* 54.45 L* -38.76

a* -30.46 a* -29.39

b* -41.55 b* -42.67

E64.55D65/10°

Sample

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 73 74

Sin comentarios

Altana Spectro-Guide Sphere Gloss Manual Manual de usuario Pagina 24