Altana Mechanical Cupping Tester Manual de usuario

Additives & InstrumentsA member ofMeasure what you see.Mechanical Cupping TesterManual

11EnglishOperation6. Clamp the substrate in position by turning the handles on the clamping clockwise – hand force is sufficient.7. There are two met

12EnglishOperation11. Check for any detached coating on the instrument and remove these before starting another test.12. Turn the handles in a clockwi

13EnglishOperationwidth and length of at least 70 mm and a thickness range of 0.3mm to 1.25mm (maximum).• Do not exceed the above figures as this may

14EnglishOperationLCD DisplayIn operation, the display will show one of the following states –LCD display StatusZEr0 Indenter is below zero or un-zero

15EnglishMaintenance5. Maintenance The frequency of regular maintenance depends on the degree of use, together with the thickness of the substrates us

16EnglishMaintenance ScheduleBetween tests Clean the indenter and clamp system as necessary.Daily Check the zero-datum as required.Yearly Have the

17EnglishComponents/Ordering Guide6. Components/Ordering Guide Mechanical Cupping TesterCat No. 5405Complies with:BS 3900, DIN 53166, DIN 53232, ISO

18English7. Technical DataMechanical Cupping Tester:Spherical Punch:20 mm (0.8 in)Full Travel:0.00 – 20.50 mm (0.0 – 0.81 in)Accuracy:± 0.05 mm (0.00

Mechanical Cupping TesterManualCat. No.: 5405BYK-Gardner GmbHLausitzer Str. 8D-82538 GeretsriedGermanyTel. 0-800-gardner (0-800-4273637) +49-8171-34

4EnglishContentsTable of contents1. Information ...52. Sys

5EnglishInformation1. Warning• The instrument must be securely positioned and fastened onto a level bench or table capable of supporting its weight.D

6English1. Cupping Tester• Zero plate• Clamp ring• Operating handle• Button• LCD display• Base plate• Magnifying glassInformationClamp ringOper

7EnglishSystem Description2. System DescriptionThe Cupping Tester was originally designed to assess the resistance of coatings of paints varnishes (a

8English3. Start-upUnpacking:Carefully open the packaging, remove the smaller instruments before removing the instrument itself. Make sure all compon

9EnglishStart-up5. Slide off the battery cover on the magnifying glass. Insert the four AA cells into the body (see battery orientation indicated on

10English4. Operation1. Rotate the handles [3] clockwise (as viewed from the right-hand side of the instrument) to lower the hemispherical indenter j